OKK PCV-40 with Fanuc OM Control.

[rogfields]

Hi, we have a OKK PCV-40 with a Fanuc OM Control, machine No. 465.
We have managed to wipe the memory (don't ask), so need to reload every thing.
We have a copy of the parameters but don't have the timers, keep relay etc.diagnostics 300 to 600.
Does anyone have a similar machine they could copy the diagnostics and send to us
We need the diagnostics from 300 onwards but only every 5 ie 300, 305, 310 etc up to about 650.
We would be eternally grateful for the info.
OKK can't help us as they say they don;t keep the info for machines this old!

Similar Threads:

• Need Help!- Velocity Control Drives and Fanuc 2000C control
• Need Help!- Taper control in Fanuc control
• Fanuc <--> Heidenhain encoder converters on Fanuc 21 control?
• Fanuc O-T control

[mozturk]

Hi,

We need also its pmc parameters, could you help us, please?

ozturkmaksut@hotmail.com