I have this one of the 1/2" MDF material, but it is missing the two gantry bottom torsion box long runs, which you can add.
Joe
http://www.cnczone.com/forums/attach...1&d=1204574654
R2 nested.jpg
Does anyone have the parts nested on 4'x8' sheets already or anyother sizes of stock? It would be great if you did and shared it.
Thanks
Similar Threads:
I have this one of the 1/2" MDF material, but it is missing the two gantry bottom torsion box long runs, which you can add.
Joe
http://www.cnczone.com/forums/attach...1&d=1204574654
R2 nested.jpg
thank you. You are a good manI have this one of the 1/2" MDF material, but it is missing the two gantry bottom torsion box long runs, which you can add.
Joe
http://www.cnczone.com/forums/attach...1&d=1204574654
R2 nested.jpg
thank you joe